Contents of Issues of the
INTERNATIONAL  JOURNAL FOR MANUFACTURING SCIENCE AND TECHNOLOGY

Technical Papers in Published Issues
Selected abstracts and electronic copies free on requestOnline papers available with password.
Vol. 1, No. 1
Free viewing of papers for this issue. Click on "full paper" to see technical paper

Aspects of Dedicated Dormant Chip for Intelligent Part Handling by Industrial Robots,
Z. Katz and S.A. Theron full paper
NC-Postprocessing and NC-Simulation for Five Axis Milling Operations With Automatic Collision Avoidance,
J.P. Kruth, B. Lawrence, P. Klewais and P. Dejonghe full paper
An Open CNC Interface for Grinding Machines
W.B. Rowe, C. Statham, J.W. Liverton and J. L. Moruzzi 17full paper
A Streamlined Life-Cycle Assessment Tool for the Production of Printers,
S.K. Ong and A.Y.C. Nee 24full paper
Taguchi-Based Methodology for Determining Process ( Model of Injection Molding Using Neural Network),
G. Choi and G.S. Choi 40full paper
Indirect Cutting Force Measurement and cutting Force Regulation Using Spindle Motor Current
G.D. Kim, W.T. Kwon and C. N. Chu 50full paper

Vol. 1, No. 2
Free viewing of papers for this issue. Click on "full paper" to see technical paper

Multi-Objective Optimization of Grinding Processes with Two Approaches: Optimal Pareto Set with Genetic Algorithm and Multi-attribute Utility Theory
Angela Adamyan, David He, Ioan Marinescu, and Radu Coman 1full paper
Modeling of Pad-Wafer Contact Pressure Distribution in Chemical-Mechanical Polishing
Yun-Biao Xin 20full paper
Development of New Honing Machine with Electrolytic Interval Dressing Capability
H. Ohmori, T. Yamamoto, I.D. Marinescu 34full paper
Adaptive Control in the straightening process of Case Hardened parts.
Giovanni Tani, Luca Tomesani 40full paper
Wavelet packet transforms of acoustic emission signals for tool wear monitoring
Xiaoli Li 56full paper
Design and manufacture of usable consumer products: part I - review of the literature
Majorkumar Govindaraju, Anil Mital 65full paper

Vol. 2, No. 1
Free viewing of papers for this issue. Click on "full paper" to see technical paper

Performance Studies of Alumina TiC-based Ceramic Tool Inserts when Turning Tool Steel
V.C. Venkatesh, Z.A. Ahmad, M. Konneh 1
Effect of Edge Geometry on Coated Carbide Tools when Face Milling Titanium Alloy
S. Sharif, A. Jawaid, S. Koksa 11
Improvement of Tapping Accuracy Through Multicriteria Choice of Technological Parameters
W. Wygowsky, M. Balanzinsky and C. Fortin 18
Hot Flashless Precision Forging of Long Pieces Development, Realisation, Benefits.
E. Doege, A. Flüß, J. Kohlstette, B. Müssig 23
The effect of Thermal Conductivity on the Depth of Laser Transformation Hardened Zones
L. J. Yang 56
A Study of Scheduling in a Mold Manufacturing Cell
p. Y. Gan, K.S. Lee, Y.F. Zhang, W.B. Toh 65
Simultaneous Scheduling of Machines and Material Handling System in an FMSB.
Siva, P. Reddy, C.S. Rao 42
Evaluation and Time Based Priority Rules in a Push System
V. Arumugam, A.M. Murtadi 47
Integration of Process Planning and Scheduling Functions for Batch Manufacturing
A.N. Saravanan. Y.F. Zhang, J.Y. Fuh 54
Optimisation of Inspection Stations by Using Simulated Annealing
Hassan, D.T. Pham 59
A Multi-Agent Computer Aided Assembly Process Planning System
Z. Shije, J. Shuang 66
Knowlegde-Based System for Computer-Aided Process Planning With Finite Element Predictions
I.A. Chaudry, B. Lengyel 71
Knowledge-Based Diagnosis System of Machine-Tools
M. Kang, D. K. Seo 76
Application of Group Technology-Based Integrated Cellular Manufacturing System
K. Suberamaniam, H. Musa, S. Rajesham 81
Improving Productivity Through Tool Tracking
M. Tap, J.R. Hewit 88

Vol. 2, No. 2
Free viewing of papers for this issue. Click on "full paper" to see technical paper

Development of oil-air mist lubrication system in ultra high speed grinding spindle
K.Ramesh, S.H.Yeo, Z.W.Zhong and Akinori Yui 1
Selection of cutting conditions and tool flow in flexible manufacturing system
F. Cus and J. Balic
Development of Micro-manipulation System for Operationin Scanning Electron Microscope
H. Eda, L. Zhou, Y. Yamamoto, T. Ishikawa, T. Kawakami and J. Shimizu
Design and manufacture of usable consumer products : part ii - developing the usability-manufacturing attribute linkages
Majorkumar Govindaraju and Anil Mital
Powder metallurgic giant magnetostriction materials and application in space structure
H. Eda, T. Mori, Y. Okada , L. Zhou and J. Shimizu
Strategies for a Generic Intelligent Control System for Grinding Part 1: Development
W. Brian Rowe, Yinnan Chen, J. L. Moruzzi, B. Mills
Analysis of Cutting Fluid Jet Impingement on a Flat Surface via Computational Fluid Dynamics
Y. K. Siow, S. L. Yang, J. W. Sutherland
Development of oil-air mist lubrication system in ultra high speed grinding spindle
K.Ramesh, S.H.Yeo, Z.W.Zhong and Akinori Yui  
Development of Micro-manipulation System for Operation in Scanning Electron Microscope
H. Eda, L. Zhou, Y. Yamamoto, T. Ishikawa, T. Kawakami and J. Shimizu

VOL 3 No. 1
Free viewing of papers for this issue. Click on "full paper" to see technical paper

Performance of Silicon carbide whisker reinforced ceramics in High Speed Milling of Inconel 718
Arunachalam.RM and M.A.Mannan    1 Currently not available.
Shaped Wire Spiral Filters Manufacturing Technologies
G. Draghici, M. Minescu, V. Ulmanu, G. Zecheru    29 full paper
Research regarding the heat-treatment influence on the properties of CA-15 Martensitic stainless steel
Gabriela Nicoleta LAZARESCU, Niculae Napoleon ANTONESCU     34 full paper
Technological Manufacturing Problems for Aluminum -Alloy Drill Pipes
M. Minescu, V. Ulmanu, Gh. Zecheru, Gh. Draghici     42 full paper
Strategies for a Generic Intelligent Control System for Grinding. Part 2: Internal CBN Grinding
H. W. Brian Rowe, Yinnan Chen, J. L. Moruzzi, B. Mills    50 full paper
Tungsten – Carbides Hardfacing of the Drill – Stem Components
V. Ulmanu, G. Draghici, G. Zecheru, M. Minescu     73   Note: large paper will take a long time to download and/or view. Be patient. full paper

VOL 3 No. 2
Free viewing of papers for this issue. Click on "full paper" to see technical paper

An Integrated Process Planning System Based On Feature Recognition And Machinability Criteria
K.-D. Bouzakis, G. Andreadis     80 full paper
Dimensional And Geometric Tolerances After Machining Case Hardened Aisi 5115 Steel
C.H.D. Almeida and A.M. Abrăo     92 full paper
Comprehensive consideration for classification of micro-nano surface and sub-surface integrity
Chenggui Li     110 full paper
FE 3D Burnishing Model
Sorin Neagu-Ventzel,Liviu Luca, Sorin Cioc, Mark Schuster, Jim Pillar,Ioan Marinescu     116 full paper

VOL 4 No. 1
Special Issue with papers from APE'01 Conference Warsaw University of Technology Warsaw, Poland Free viewing of papers for this issue. Click on "full paper" to see technical paper

Intelligent Virtual Design of Precision Forging Processes in Consideration of Microstructure Evolution
Prof. Dr.-Ing. E. Doege, Dr.-Ing. J. Dittmann and Dipl.-Ing. C. Silbernagel     1 full paper
Phenomenological aspects of a modified fragmentation of the ground material
Lucjan Dabrowski, Mieczyslaw Marciniak     14 full paper
Possibility to Control Surface Integrity in Grinding
Bogdan Kruszynski, Technical University of Lódz, Lódz, Poland Shinichi Togo, Tohoku Gakuin University, Tagajo, Japan Ryszard Wójcik, Technical University of Lódz, LódzPoland     22 full paper
Tool Wear Monitoring by Means of Artificial Neural Networks
Krzysztof Jemielniak     28 full paper
Comparative Investigation Into The Brush Electrodischarge Alloying With The Electrodes Of Alloy Steel And Tungsten
Bogdan Nowicki, Robert Pierzynowski, Slawomir Spadlo     44 full paper
Electrical Discharge Machining in Dielectric-Powder Media
Marek Rozenek, Jerzy Kozak and Lucjan Dabrowski     54 full paper

VOL 4 No. 2
Free viewing of papers for this issue. Click on "full paper" to see technical paper

Models Of Non-Linear Dynamic Behaviour Of Chains Transmission Under Variable Technological Loads
Assoc. Prof. Dr. Eng. Mihai BUGARU    1 full paper
Systems Failure and Safety Assessment Using Integrated Petri Net Modeling and Fault Tree Analysis Approaches
Angela Adamyan and David He     10 full paper
Influence of warm working parameters on deformation behavior and microstructure of AISI 1015 carbon steel
Carmen Medrea-Bichtas, Gavril Negrea and Serban Domsa    38 full paper
Development of a 3 dof Parallel Kinematic Machine for an application in shoes manufacturing
R.Maj, M.Leonesio, F.Modica, and G.Bianchi     45 full paper
Prediction of Plastic Preform Temperature Profile and modeling perspectives
Samuel H. Huang, Ranganath Kothamasu, Yogesh C. Shiralkar, and David A. Bogstad     56 full paper
A Statistics-Assisted Fuzzy-Nets-Based In-Process Tool Wear Prediction System in Milling Operations    84 full paper

Vol 5 Nol 1
 Subscrition viewing only. Contact the IJMST to obtain abstracts of select papers.

Intelligent Virtual Design of Precision Forging Processes in Consideration of Microstructure Evolution
E. Doege, J. Dittmann and C. Silbernagel p5 Full Paper
Development of electrochemical micromachining system and machining of three-dimensional shape
Tsuneo Kurita, Kunio Chikamori, Shinichirou Kubota and Mitsuro Hattori p.21
An algorithm architecture and application for process chains optimization of HSC
Yan Luo p.27
An statistical-fuzzy-logic based in-process surface roughness recognition system in turning operations
Joseph C. Chen and Le Kao p. 36
In-Process Mixed Material-Caused Flash Monitoring (IPMFM) System in the Injection Molding Process
Jie Zhu, Joseph C. Chen and Zhe Zhang 50

VOL 5 No. 2
  Subscrition viewing only. Contact the IJMST to obtain abstracts of select papers.

Bonded Versus Loose Diamond Abrasion of Advanced Ceramics
C.E. Spanu, I.D. Marinescu and M. Hitchiner p. 9
Hard Turning as Finishing Alternative for 1117 Steel Camshafts
Radu Pavel, Keith Sinram, Dana Combs, Jim Pillar and Ioan Marinescu p. 21
Wear of PCBN Tool When Machining Metal Matrix Composite
X. Ding, X.D. Liu, W.Y.H. Liew, S.T. Ng 30
Machinability of Aluminum Alloys
T. Wada, K. Hiro, J. Fujiwara p. 39
An Approach to Surface Finishing Using a Newly Developed Magnetic Polishing Liquid (MPL)
Y. Wu , K. Shimada, Y.C. Wong, M. Kato p. 46
Prediction of White Layer Formation in Hardened Steel Machining
Sangil Han and Shreyes N. Melkote p. 55
Research on Acoustic Characteristics in Ultrasonic Lapping Using Fixed Grains
Zhao Bo, Gao Guofu, Liu Chuanshao, Jiao Feng and Tie Ying p.63
An Atomic Dynamic Model for Nanoscale Ductile Mode Cutting of Silicon Wafer Material
K. Liu, T. He, X.P. Li and M. Rahman p.69
Research on NC Grinding Method of Isometric Polygonal Profile
D. S. Wang, G. Z. Li and A. P. Zhou p. 78

VOL 6 No. 1
  On Line version available.   Open. Requires subscription

Touch Sensing for High-speed Spindle Machine Tool
M. Fukuta, Y. Yamane, K. Sekiya, T. Sugino and N. Narutaki p.5
A Nano Coordinate Measuring Machine Using Optical Auto-Focusing Probe
E.A. Kirkland, T.R. Kurfess, S.Y. Liang p.12
On the Consideration of the Stiffness Balance of Tool Holders for Machining Centers
M. Okabe and Y. Takagi p.17
Development of a New On-Machine Balancing System for Grinding Wheels
K. Sato, Y. Nagano and M. Okabe p.25
Development of a Mathematical Model of Feed Drive Systems for NC Machine Tools
Ryuta Sato and Masaomi Tsutsumi p..31
Design of a 1-DOF Flexure-based Positioning Stage
H.L. Ho, G.L. Yang and W. Lin p.40
Sub-surface Defects Detection in Unpolished Si-Wafer for Semiconductor Industries
Ganesha Udupa, B.K.A Ngoi and Freddy Goh H. C. p.48
Non-Contact In-Situ Measurement of Wear Particle Formation by Contact Potential Difference Techniques
Andrew Watt, Jiantao Zheng, Anatoly Zharin and Steven Danyluk p.59

VOL 6 No. 2
On Line version available.   Open. Requires subscription

Spectroscopic Ellipsometric Analysis of Tantalum Oxide Thin Films --Effect of the Pretreatment on substrate
H. Xie, B.H. Tan, F.L. Ng, J. Wei, S.K. Tung p. 5
Investigation of Surface Features on BK7 Glass via Focused Ion Beam Bombardment
Yongqi Fu, Ngoi Kok Ann Bryan, Wei Zhou, Dongzhu Xie and Lim Boon Hong p.12
High Smoothness Finishing of Stainless Steel Surface by Chemical Polishing
Ruxiong Cai, Fengmin Liu, Ingegerd F. Annergren and Guojun Qi p.19
Femtosecond Laser-Induced Damage Morphologies and Ablation of Crystalline Silicon: A Study On The Incubation Effect
D. V. Tran, Y. C. Lam, V. M. Murukeshan, J. C. Chai, H. Y. Zheng and D. E. Hardt p.26
Surface Texturing of Mill Rolls for the Production of Aluminium Strip
T.E. Warrender, D.K. Aspinwall, R.C. Dewes, J.M.T. Simao and G. M. Scamans p. 34
Characterization of Powder Injection Molded Aluminum
H.P. Tham, L.K. Tan and J. Ma p.40
Feedback Control of WEDM Power for Improving Its Removal Dynamics and Finishing Quality
Albert W. J. Hsue p.46
TiNi1-xCux Shape Memory Alloy Thin Films For Biopsy Application
Jufang Chen, Hejun Du and Yongqing Fu p.54
Precision Measurements in the Failure Analysis of Heading Dies -A Case Study
M.C. Sim, K.S. Lee and S.K. Tung p. 61
Finite Element Study of Influence of Die Outer Corner Angle on Equal Channel Angular Extrusion
A.V. Nagasekhar, Yip Tick-Hon and S. Li p.68

VOL 7 No. 1
On Line version available.   Open. Requires subscription

Suppression of Grinding Chatter Using Infeed drives
Berend Denkena, Jörn Jacobsen, Bodo Heimann, Oliver Schütte, Karol Grudzinski and Andrzej Bodnar p.5
Modeling of deviations on machined surfaces
W. Dhifalli, W. Bouzid and A. Zghal p.15
Scanning of the Aircraft Turbine Blade by the Co-ordinate Measuring Machine With Solid Head
Ryszard Filipowski p.26
On the differences between mechanical properties and structure of ductile iron castings austempered using conventional and direct method
Mieczysław Kaczorowski, Dawid Myszka p.33
Surface layer in cylindrical grinding
Bogdan Kruszyński, Shinichi Togo and Ryszard Wójcik p.43
Modeling the Noise Generated During the High Speed Face Milling Process
Shrikrishna D. Marathe, Shiv G. Kapoor and Richard E. DeVor p.48
An Artificial Neural Network Approach for Pulse Classification in Electro Chemical Discharge Machining (ECDM) – Designing of Neural Network Architecture
T.K.K.R. Mediliyegedara, A.K.M. De Silva, D.K. Harrison and J.A. McGeough p.58
Design of High Efficiency Hypersonic Plasma Spraying System and Characteristics of Its Ceramic Coatings
Sheng ZHU and Binshi XU p.68

VOL 7 No. 2
On Line version available.   Open. Requires subscription

Computer Aided Electrode Design in ECM
T. Paczkowski, J. Zdrojewski p. 5
Influence of cutting edge radius on the wear resistance of PM-HSS milling inserts
J.Rech , M.J. Schaff p.15
Electrochemical Finishing Surfaces After Rough Milling
Adam Ruszaj, Jan Czekaj, Tatiana Miller, Sebastian Skoczypiec p.21
Discussion of Cavitation Phenomena Influence On Electrochemical Machining Process
Sebastian Skoczypiec, Adam Ruszaj p. 27
Precise Finishing of Inner Contours withAbrasive Flow Machining
Eckart Uhlmann; Hubert Szulczynskip. p.33
Problems in Programming HSM CNC Machines
Zenobia Weiss, Roman Konieczny, Radosław Paszkiewicz p.40
Some aspects of mathematical modelling of thermal phenomena occurring during SLS process
Dominik Wyszyński, Adam Ruszaj p.49
A Memory Based Learning Process for a Biologically Inspired Manufacturing System
Z. Katz and J. Enslinp p.55

VOL 8 No. 1
On Line version available.   Open. Requires subscription

Parametric Analysis and Optimization of Drilling of Metal Matrix Composites based on the Taguchi Method
Dr. S.S. Mahapatra And Amar Patnaik p.5
Adaptive Resonance Theory Applied To Generalized Machine Cell Formation
Dr.S.S.Mahapatra And R.Sudhakarapandian p.13
Estimation of The Measuring Uncertainty in Coordinate Metrology
Frank M. Hoehne, Dr. Gordon Smith, Dr. Sagar Midha p.22
Dynamic Analysis On Optimal Placement Of Fixturing Elements Accounting For The Effect Of Workpiece Elasticity
G. Prabhaharan, K.P.Padmanaban And P.Asokan p. 32
Analysis Of The Effects Of Cutting Edge Geometry On Tool Life, Specific Energy And Surface Roughness In Dry Turning Operation
A.Noorul Haq And T. Tamizharasan p.44
Design Optimization And Manufacturing Of Plate Cams Using Nurbs
N. Sateesh C. S. P. Rao p.58
A Modified Ga Approach For Simultaneous Scheduling Of Machines And Agvs In An FMS
B. S. P. Reddy And C. S. P. Rao p.68
3d Measurements Of The Knee Prosthesis Surfaces Applied In Optimising Of Abrasive Manufacturing Process
I. Hilerio, T. Mathia, S. Ducret, A. Midol, C. Alepee p.78
A Web Service Providing Communication Between Designers And Manufacturers Of Prismatic Parts
Dr. K.-D. Bouzakis, Dr. G. Andreadis, Dr. A. Vakali p.84
Assessment Of Tool Electrode Shape For Sculptured Surface Manufacturing Processes Involving Edm Operations
Z.Lechniak p.91

VOL 8 No. 2
On Line version available.   Open. Requires subscription

Automated View Planning with Self-Termination
B. He And Y. F. Li p.5
Design and Implementation of a Minimum Time Transition for an Inverted Pendulum
Matthew G. Earl And Raffaello D'Andrea p.11
Landmark-based Simultaneous Localization and Mapping with Stereo Vision
Matthew N. Dailey And Manukid Parnichkun p.17
Line Segments Matching Across Micro Images
Sun Wenting And Andrew Shacklock p.23
New method of aspheric generation for manufacturing glass moulds on Vertical Machine Centre
V.C. Venkatesh, S. Izman , P.S. Vichare, C. Woo, S. Murugan p.29
Objective Functions for Optimal Control in Cam Follower Systems
Jian-Guo Sun, Richard W. Longman, Ferdinand Freudenstein p.35
Online Estimation of Image Jacobian by Taylor Polynomial using Evolutionary Strategy for Visual Servo Systems
Pariwat Keosatit, Prabhas Chongstitvatana p.42
Real Time, Dynamic Target Tracking and servoing using Image Motion
Israr Ahmed Khan SAEED, Nitin V Afzulpurkar p.46
An approach for establishing the sampling strategy in coordinate metrology
F.M. Cebulla, G. Smith, S. Midha p.52
Slipline field analysis of free-chip machining with a tool with flank wear
S. T. Dundur And N. S. Das p.60

VOL 9 No. 1
On Line version available.   Open. Requires subscription

Impact of Novel Bell-jar type CMP Machine on CMP characteristics of Optoelectronics Materials
Toshiro K. Doi, Shigeru Watanabe, Hideyuki Doy, Shin Sakurai, Daizo Ichikawa.    P.5
Developments in Micro Grinding with Planetary Kinematics
Mike Hitchiner and Bob Willey  p.11
Precision Polishing Technology of SiC Single Crystal Under Ultraviolet-ray Irradiation
Seok-Hyoung Hong, Junji Watanabe, Mutsumi Touge.  p.23
Study on Polishing Characteristics in High Temperature Chemical Mechanical Polishing for SiC Ceramics
Panart Khajornrungruang, Hidenori Matano, Tadashi Matsumoto, Keiichi Kimura.   p.29
Effect of Preferred Orientations on Single Point Diamond Turning of Polycrystalline Materials
W.B. Lee, Y. K. Sze, S. To And C. F. Cheung.   p.35
Finite Element Modeling of Plunge Hard Turning of Disks Made of AISI 1137 Steel
Radu Pavel, Anil Srivastava, Ioan Marinescu   p.43
Considerations Regarding the 100 Cr6 Material’s Conduct Through the cold Rolling of the Bearing Rings
O.V.Pruteanu, Dr. Paraschiv, C. Pricope, M. Bunea, I.Sarbu, C. Carausu   p.51
Effects of Workpiece Composition and Depth-of-Cut during Ultra-Precision Machining of Electroless-Nickel
A. Pramanik, K.S. Neo, M. Rahman, X. P. Li, M. Sawa, Y. Maeda    P.59
Molecular Dynamics Simulation of Nano Grinding - Influence of Tool Stiffness
Jun Shimizu, Libo Zhou And Hiroshi Eda.   p.69
Experimental Study of Surface Roughness in a Micro-milling Process
Sun Yazhou1, Liang Yingchun, R. Du1 .   p.77
Glass Micromachining by Powder Blasting for Microfluidic Applications
Adisorn Tuantranont, S. Rahong, A. Wisitsoraat, N. Porntheerapat, And T. Lomas   p.83
Effect Of Convective Cooling On Tool Wear In Hard Dry Turning
Noorul Haq .A And T.Tamizharasan.   p.87
Application of Selective Breeding Algorithm for Job Shop Scheduling Problems
M.Chandrasekaran, P.Asokan1, S.Kumanan1, Subramanium Arunachalam.   p.103
An Hybrid Grouping Genetic Algorithm For Cell Formation With Alternative Part Routings And Multiple Machines
K. Eswaraiah And C. S. P. Rao.   p.119

VOL 9 No. 2
On Line version available.   Open. Requires subscription

Optimization Of Cutting Parameters Of Drilling Al/Sicp Metal Matrix Composite Using Taguchi Technique
Noorul Haq .A And Marimuthu   p. 5
Grouping Genetic Algorithm For Cell Formation Problem
K. Eswaraiah And C. S. P. Rao   p.11
Modeling And Optimization Of Machining Tolerance Design Through Intelligent Techniques
Ivakumar.K , Saravanan.R , And Noorul Haq.A   p.21
Identification And Specification Of Robot Kinematic Parameters Using Artificial Neural Networks
M. Dev Anand, T. Selvaraj, S. Kumanan, And M. Austin Johnny   p.33
Multi Objective Optimization For Job Shop Scheduling Using Sheep Flocks Heredity Model Algorithm
M. Chandrasekaran, P. Asokan, S. Kumanan, S. Umamaheswari, C.S.P.Rao   p.47
Job And Tool Sequencing In Flexible Manufacturing System Using A Particle Swarm Optimization Technique
P. Udhayakumar, S. Kumanan, P. Asokan   p.55
Evaluation Of A Material Flow Stress Model Adopted In Finite Element Modeling Of Metal Cutting
S. Izman1, M. N. Tamin1, V.C. Venkatesh, T.T. Mon   p. 67
Optimal Sub-Division Of Depth Of Cut In Cnc Multi-Pass Face Milling System Using Non-Traditional Optimization Techniques
S. Satishkumar And P. Asokan   p.75
Optimization Of Friction Joining Parameters In Processing Of Similar Ferritic Stainless Steel Joints By Evolutionary Computational Techniques
P.Sathiya, S.Aravindan And A.Noorul Haq   p.89
Analysis Of Weld Strength Parameters By.Taguchi Method For Direct Drive Friction Welded Joint Of Aluminium 6063 with Stainless Steel 304 Grade
Bhuloksundar Mohanty, S. Jose  p. 101
Optimization Of Wire Electrical Discharge Machining (Wedm) Process Parameters Using Taguchi Method
Dr. S.S. Mahapatra And Amar Patnaik   p.129
Genetic Algorithm (Ga) Based Tolerance Allocation With Multi Objective Functions
Sivakumar.K, Saravanan.R And Noorul Haq.A   p.148

Select papers free with a paid subscription. Or ask for price quote on individual papers. Subscription information

rev 10/10/07